|
|
Ethernet Bridge + netfilter HowtoNils Radtkev0.8, July 2005Setting up an ethernet bridge gives us the chance to integrate a surveying and/or regulating instance transparently into an existing network. This setup requires no changes to the logical network topology. It is accomplished by plugging the ethernet bridge in the physical network topology between the network itself and the routing instance (that piece of hardware connected to the Internet). This Howto is available in other formats. Preferably downloadable: documentation tarball. You may find this Howto as part of the Linux Documentation Project. Looking for other languages? See the German version, then! And as of march 2003 there is a french version available with courtesy of François Romieu and Guillaume Lelarge: French version. Today, some day in july 2005, I stumbled across an italian version of this HOWTO! Unfortunately there's no translator's note in the document, courtesy is unbeknownst so far: Italian version.
1. Introduction
2. Required software
3. Set Linux up to serve
4. Test your new bridged environment!
5. User experiences
6. LinksNext Previous Contents |
