Manipulating neighbors table using "ip"

Linux IPv6 HOWTO (en)
Prev	Chapter 8. Neighbor Discovery	Next

8.2. Manipulating neighbors table using "ip"

8.2.1. Manually add an entry

With following command you are able to manually add an entry

# ip -6 neigh add <IPv6 address> lladdr <link-layer address> dev <device>

Example:

# ip -6 neigh add fec0::1 lladdr 02:01:02:03:04:05 dev eth0

8.2.2. Manually delete an entry

Like adding also an entry can be deleted:

# ip -6 neigh del <IPv6 address> lladdr <link-layer address> dev <device>

Example:

# ip -6 neigh del fec0::1 lladdr 02:01:02:03:04:05 dev eth0

8.2.3. More advanced settings

The tool "ip" is less documentated, but very strong. See online "help" for more:

# ip -6 neigh help
Usage: ip neigh { add | del | change | replace } { ADDR [ lladdr LLADDR ] 
          [ nud { permanent | noarp | stale | reachable } ] 
          | proxy ADDR } [ dev DEV ] 
       ip neigh {show|flush} [ to PREFIX ] [ dev DEV ] [ nud STATE ]

Looks like some options are only for IPv4...if you can contribute information about flags and advanced usage, pls. send.

Prev	Home	Next
Displaying neighbors using "ip"	Up	Configuring IPv6-in-IPv4 tunnels