Home Page Home Page
 Home | Linux Administration | Corporate Services | Resources | About Us Support Center
Monthly Server Management One-time Server Services Other Services
Network Administration Network Monitoring Network Security High Availability Load Balancing Data Backup and Recovery
Linux HOWTOs Linux Guides Linux Articles New RFCs Vulnerability list Linux Journal
Testimonials Partners Careers Contact Us Site Map
PLIP Install HOWTO: What do you need ? Next Previous Contents

5. What do you need ?

  • A Personal Computer, laptop or desktop, called the target computer or simply target.

  • A 3 1/4" inch floppy drive on the target.

  • Two or three fresh floppies. They don't need to be formatted. You also need one more DOS formatted floppy if you have to play with FIPS.

  • Another computer with a cdrom drive and nfs services, called source computer or simply source. It doesn't have to be a Linux system but just a system which can export a cdrom drive via nfs. In this HOWTO, I assume it is a Linux system.

  • A cdrom distribution. I took a Debian Hamm (2.0r3) from an old Infomagic compilation. I think every distribution can be installed this way, but I'm not sure. I've read a French document, written by Chmouel Boudjnah, saying the RedHat distribution has an easy installation process. Chmouel's document also deals with the Debian distribution, so if you read French, you can use Chmouel's document instead of this one.

  • A Null-Modem DB 25 cable. Is it the same as a serial cable? You'll find the answer in the next release.

  • Some time: 3 hours.

  • Coffee. 1 liter.


Next Previous Contents