Chapter 20. Subshells
Running a shell script launches a new process, a
subshell.
A subshell is a separate instance of the command processor
-- the shell that gives you the prompt at
the console or in an xterm window. Just
as your commands are interpreted at the command line prompt,
similarly does a script batch-process a list of
commands. Each shell script running is, in effect, a subprocess
(child process) of the parent shell.
A shell script can itself launch subprocesses. These
subshells let the script do
parallel processing, in effect executing multiple subtasks
simultaneously.
#!/bin/bash
# subshell-test.sh
(
# Inside parentheses, and therefore a subshell . . .
while [ 1 ] # Endless loop.
do
echo "Subshell running . . ."
done
)
# Script will run forever,
#+ or at least until terminated by a Ctl-C.
exit $? # End of script (but will never get here).
Now, run the script:
sh subshell-test.sh
And, while the script is running, from a different xterm:
ps -ef | grep subshell-test.sh
UID PID PPID C STIME TTY TIME CMD
500 2698 2502 0 14:26 pts/4 00:00:00 sh subshell-test.sh
500 2699 2698 21 14:26 pts/4 00:00:24 sh subshell-test.sh
^^^^
Analysis:
PID 2698, the script, launched PID 2699, the subshell.
Note: The "UID ..." line would be filtered out by the "grep" command,
but is shown here for illustrative purposes. |
In general, an external
command in a script forks
off a subprocess,
whereas a Bash builtin does not. For this reason,
builtins execute more quickly than their external command
equivalents.
Command List in
Parentheses
- ( command1; command2; command3; ... )
A command list embedded between
parentheses runs as a
subshell.
Variables in a subshell are
not visible outside the block of code
in the subshell. They are not accessible to the parent process, to the shell
that launched the subshell. These are, in effect, local variables.
Example 20-1. Variable scope in a subshell
#!/bin/bash
# subshell.sh
echo
echo "We are outside the subshell."
echo "Subshell level OUTSIDE subshell = $BASH_SUBSHELL"
# Bash, version 3, adds the new $BASH_SUBSHELL variable.
echo; echo
outer_variable=Outer
global_variable=
# Define global variable for "storage" of
#+ value of subshell variable.
(
echo "We are inside the subshell."
echo "Subshell level INSIDE subshell = $BASH_SUBSHELL"
inner_variable=Inner
echo "From inside subshell, \"inner_variable\" = $inner_variable"
echo "From inside subshell, \"outer\" = $outer_variable"
global_variable="$inner_variable" # Will this allow "exporting"
#+ a subshell variable?
)
echo; echo
echo "We are outside the subshell."
echo "Subshell level OUTSIDE subshell = $BASH_SUBSHELL"
echo
if [ -z "$inner_variable" ]
then
echo "inner_variable undefined in main body of shell"
else
echo "inner_variable defined in main body of shell"
fi
echo "From main body of shell, \"inner_variable\" = $inner_variable"
# $inner_variable will show as blank (uninitialized)
#+ because variables defined in a subshell are "local variables".
# Is there a remedy for this?
echo "global_variable = "$global_variable"" # Why doesn't this work?
echo
exit 0
# Question:
# --------
# Once having exited a subshell,
#+ is there any way to reenter that very same subshell
#+ to modify or access the subshell variables? |
See also Example 31-2.
 | While the $BASH_SUBSHELL
internal variable indicates the nesting level of a
subshell, the $SHLVL
variable shows no change within
a subshell. echo " \$BASH_SUBSHELL outside subshell = $BASH_SUBSHELL" # 0
( echo " \$BASH_SUBSHELL inside subshell = $BASH_SUBSHELL" ) # 1
( ( echo " \$BASH_SUBSHELL inside nested subshell = $BASH_SUBSHELL" ) ) # 2
# ^ ^ *** nested *** ^ ^
echo
echo " \$SHLVL outside subshell = $SHLVL" # 3
( echo " \$SHLVL inside subshell = $SHLVL" ) # 3 (No change!) |
|
Directory changes made in a subshell do not carry over to the
parent shell.
Example 20-2. List User Profiles
#!/bin/bash
# allprofs.sh: print all user profiles
# This script written by Heiner Steven, and modified by the document author.
FILE=.bashrc # File containing user profile,
#+ was ".profile" in original script.
for home in `awk -F: '{print $6}' /etc/passwd`
do
[ -d "$home" ] || continue # If no home directory, go to next.
[ -r "$home" ] || continue # If not readable, go to next.
(cd $home; [ -e $FILE ] && less $FILE)
done
# When script terminates, there is no need to 'cd' back to original directory,
#+ because 'cd $home' takes place in a subshell.
exit 0 |
A subshell may be used to set up a "dedicated
environment" for a command group.
COMMAND1
COMMAND2
COMMAND3
(
IFS=:
PATH=/bin
unset TERMINFO
set -C
shift 5
COMMAND4
COMMAND5
exit 3 # Only exits the subshell!
)
# The parent shell has not been affected, and the environment is preserved.
COMMAND6
COMMAND7 |
As seen here, the
exit
command only terminates the subshell in which it is running,
not the parent shell or script.
One application of such a "dedicated environment"
is testing whether a variable is defined.
if (set -u; : $variable) 2> /dev/null
then
echo "Variable is set."
fi # Variable has been set in current script,
#+ or is an an internal Bash variable,
#+ or is present in environment (has been exported).
# Could also be written [[ ${variable-x} != x || ${variable-y} != y ]]
# or [[ ${variable-x} != x$variable ]]
# or [[ ${variable+x} = x ]]
# or [[ ${variable-x} != x ]] |
Another application is checking for a lock file:
if (set -C; : > lock_file) 2> /dev/null
then
: # lock_file didn't exist: no user running the script
else
echo "Another user is already running that script."
exit 65
fi
# Code snippet by Stéphane Chazelas,
#+ with modifications by Paulo Marcel Coelho Aragao. |
+
Processes may execute in parallel within different
subshells. This permits breaking a complex task into subcomponents
processed concurrently.
Example 20-3. Running parallel processes in subshells
(cat list1 list2 list3 | sort | uniq > list123) &
(cat list4 list5 list6 | sort | uniq > list456) &
# Merges and sorts both sets of lists simultaneously.
# Running in background ensures parallel execution.
#
# Same effect as
# cat list1 list2 list3 | sort | uniq > list123 &
# cat list4 list5 list6 | sort | uniq > list456 &
wait # Don't execute the next command until subshells finish.
diff list123 list456 |
Redirecting I/O to a subshell uses the "|" pipe
operator, as in ls -al | (command).
| A command block between curly
braces does not launch
a subshell. { command1; command2; command3; . . . commandN; } |
